Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of UBE Nylon 1013 NW8 - PA6 - UBE

Material Data Center offers the following functions for UBE Nylon 1013 NW8:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ube Nylon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Retrait au moulage , parallèle 0.012 mm/mm ASTM D 955
Retrait au moulage, perpendiculaire 0.013 mm/mm ASTM D 955
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module de traction d’élasticité 80 MPa ASTM D 638
Résistance de traction à la rupture 65 MPa ASTM D 638
Allongement à la rupture 100 % ASTM D 638
Module de flexion 2850 MPa ASTM D 790
Résistance à la flexion 110 MPa ASTM D 790
Dureté Rockwell R 120 - ASTM D 785
Izod choc avec entaille, 1/8 in 62.5 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
UL 94 inflammabilité V-2 - UL 94
DTUL à 66 psi 195 °C ASTM D 648
DTUL à 264 psi 75 °C ASTM D 648
Température de fusion 220 °C ASTM D 3418
Propriétés diversesValeurUnitéNorme du test
Densité 1140 kg/m³ ASTM D 792
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Couleurs naturelles
Disponibilité régionale
Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.